Clean the construction surface to ensure that there is no oil or dust.
Cut the nozzle, attach the nozzle, and squeeze it out with a sealing gun.
Bonding method of weight-bearing materials:
Can be directly bonded to load bearing materials. First glue the weight-bearing material together, and then separate it, wait for about 5 minutes to dry, and then firmly press the material to be bonded together and knock it tightly to make it in place. Support with braces if necessary. (Heavy materials must be supported)
Dry bonding method: (ceiling wire, skirting wire, door frame, background wall)
1. Extrude “Zhi” type viscose along the bonding surface.
2. Squeeze the adhesive side towards the surface to be glued and press both sides tightly.
3. Pull the two bonding surfaces apart and let the liquid nail glue evaporate for 2-5 minutes.
After 4.2-5 minutes, press again and tap lightly along the joint.
5. Fix the adhesive temporarily with auxiliary tools for 24 hours and then cancel the auxiliary fixation.
6.24 hours to achieve the best bonding effect, fully cured within 2-3 days.
Wet bonding method: (wood floors, marble countertops and other large materials)
1. Apply liquid nail super glue according to dry bonding method.
2. The adhesive surface will be pressed tightly, and the bonding effect can be achieved within 24 hours, and it will be completely cured within 2-3 days.
Fast adhesive liquid nail has ultra-fast adhesion, especially on many surfaces, the effect is more significant, as long as any surface is hollow structure, you can achieve fast bonding effect, without any auxiliary device in the bonding process.
Post time: Jun-05-2024